भुगतान & नौवहन नियमों:
|Material:||Diamond and Steel body||Design:||Natrual diamond e or Tungsten Carbide surfac set|
|Available Item:||Q-Series,T-series,B-series,NWG,HMLC ect||Position:||Connect with the drill core bit|
Reaming shell is used to couple the drill bit with the core barrel. It is suitable for use on all conventional
and wireline core barrel. This product is mainly designed to ream the hole to the standard diameter. It can
keep the stability of the core barrel. When the old bit is replaced by the new one, reaming shell can also provide sufficient clearance for the new bit. It can also help to resist the abrasion of the core barrel.
Reamer is set with natural or synthetic diamond,and it is used to couple the dril bit with the core barrel. Its
main function is to ream the hole to the correct comstant specific diameter which ensures adequate clearance for the core barrel and sufficient clearance for the new bit which replaces an old one.It also acts as a stabilizer for drill bit.
The matrix ring of PCD Reaming Shell is set with Polycrystalline Diamond. The Polycrystalline Diamond is produced from synthetic diamond sintered with bond under high temperature and high pressure; it has an impressive abrassion resistance and high thermal stability. The PCD reaming shell is suit for soft to hard rock formations.
Surface set reaming shells are set natural diamonds outside of the shells, generally, with the stone size 20/30. The rock cutters are flushed smoothly as the well design of the waterways.
Usually, we can make two types of Surface Set Reaming Shell, one is Spiral Rib Type, another is Spiral Segments Type.
Q" Series: AQ,BQ,NQ,HQ,PQ(Front end & Back end Type)
T Series: T36,T46,T56,T66,T76,T86
WT Series: RWT,EWT,AWT,BWT,NWT,HWT(Single Tube/Double Tube)
WG Series: EWG,AWG,BWG,NWG,HWG (Single Tube/Double Tube)
WM Series: EWM,AWM,BWM,NWM
T2/T6 Series: T256,T266,T276,T286,T2101/T676,T686,T6101,T6116, T6131,T6146,T6H
व्यक्ति से संपर्क करें: Mr. Yu